A bridal store in Portland stocked marquise moissanite based on a single Instagram look and ordered a 2.2:1 ratio parcel. On the finger, the stones looked like thin needles — elegant on the model, awkward on most customers. Half the parcel sat unsold for six months. The buyer had confused a fashion-editorial ratio with a wearable one.
Marquise is the most shape-sensitive cut in moissanite wholesale. Get the ratio right and it is a flattery machine; get it wrong and it sits on your tray. Here is the spec that sells.
The ratio problem
A marquise is an elongated, pointed-ends stone. Its whole purpose is to make the finger look longer and slimmer. But that flattery only works within a narrow ratio band. Too skinny (over 2.0:1) and the stone reads fragile and impractical. Too fat (under 1.6:1) and it loses the elongated effect that makes marquise worth buying.
Industry catalogs often quote marquise by carat weight without quoting the ratio. That is the trap. Two 1.00 ct marquise stones can look completely different on the finger. When you order bulk marquise, you are ordering a ratio as much as a weight.
| Marquise ratio | Look on finger | Sell-through | Best for |
|---|---|---|---|
| 1.6:1–1.7:1 | Fuller, substantial | Good | Customers new to marquise |
| 1.8:1–1.9:1 | Balanced elongated | Best | Bridal solitaires, our default |
| 2.0:1–2.2:1 | Very slender | Low | Fashion editorial, east-west rings |
What we lock on a bulk marquise order
Our default bridal marquise is cut to 1.85:1 ±0.05. That ratio reads long and slim on the finger without looking needle-thin. When you order, we also enforce:
- Tip symmetry: the two pointed ends of a marquise must be equally sharp and centered. A lopsided tip is the first thing a customer notices on the finger. We inspect tip alignment under a measuring mat before packing.
- Bow-tie at the center: elongated stones show a bow-tie shadow. Marquise is more prone to it than oval because the pavilion steepens at both tips. We reject any marquise where the center shadow is visible to the naked eye at 25 cm.
- Girdle at tips: the two pointed ends are thin. We specify a slightly thicker girdle at both tips to prevent chipping during prong setting. Marquise tips nick easily, and a pre-inspected parcel cuts your setting breakage substantially.
- Length-to-width lock: we ship all stones in a parcel to the same ratio. Mixing a 1.7:1 and a 2.0:1 in one tray looks like a mistake to the customer.
Which marquise to stock
Bridal boutiques — buy the 1.85:1 default in 10x5 mm or 12x6 mm. It is the ratio that flatters the widest range of finger shapes and sells without custom fitting. Pair with a four-prong setting that cups both tips.
Fashion and east-west lines — the 2.0:1+ ratio works when the stone sits horizontally across the finger. In that orientation the extreme length reads as a design statement, not a needle. Label these as "east-west" on your tray so staff do not show them vertically.
Private-label programs — lock your ratio once. Marquise is the cut where reorder drift shows most visibly; a 1.85:1 stone in reorder 1 must match a 1.85:1 in reorder 12. We hold the cutting template so it does.
Browse marquise moissanite, compare the elongated shape with oval stones, or read finger-flattering guides in our blog.
Frequently Asked Questions
What length-to-width ratio is best for a marquise engagement ring?
A 1.8:1 to 1.9:1 ratio is the wearable sweet spot. It elongates the finger without looking needle-thin. Our default bridal marquise is cut to 1.85:1, which sells across the widest range of finger shapes.
Do marquise moissanite stones show a bow-tie?
Yes, elongated marquise stones are prone to a central bow-tie shadow. We reject any stone where that shadow is visible to the naked eye at arm's length, so our bulk parcels ship clean.
Are marquise stones easy to set?
The two pointed tips are the risk points. Use a four-prong setting that cups each tip, and make sure the girdle at the tips is slightly thicker. We ship marquise stones with a thicker tip girdle to prevent nicks during prong closing.
What size marquise is most popular?
The 10x5 mm and 12x6 mm sizes are the volume sellers. They read as a 1-carat-equivalent center stone, fit standard solitaire heads, and suit both day and evening wear.
What is the MOQ for marquise moissanite?
Our wholesale MOQ is 20 pieces per size and ratio. Because every stone is tip- and bow-tie inspected, sample parcels ship within 5 business days.
Key takeaways
- Buy marquise by ratio, not just by carat weight.
- Stick to 1.8:1–1.9:1 for bridal; reserve 2.0:1+ for east-west designs.
- Inspect tip symmetry and bow-tie before accepting a parcel.
- Request a flatteringly-ratioed sample: MOQ 20 pcs per size, shipped in 5 business days. Open an account.