The marquise is the shape people ask the most specific questions about, because it looks dramatic in photos but buyers are not always sure how it will wear. We gathered the questions we field every week about marquise moissanite and answered them straight. If yours is not here, ask us directly on the inquiry page.
Appearance and proportions
1. What makes a marquise look good? A balanced length-to-width ratio around 1.8 to 2.0:1, even light return, and two clean points. Too narrow and it looks thin; too wide and it stops looking like a marquise.
2. Does it look as big as people say? Yes. It is the longest shape we cut, so a 1ct marquise reads larger on the finger than a 1ct round. This is its main selling point.
3. Will it show a bow-tie? A poorly cut marquise shows a dark band down the center. We QC every marquise face-up so the light return is even. Inspect your samples the same way; our bow-tie guide explains the check.
Buying and grading
4. What color should I choose? D to F for white gold or platinum, because the long face shows any warmth. F-G works in yellow or rose gold. Our marquise range is stocked D-F standard.
5. What clarity? VS is eye-clean and cheaper. Choose VVS only if the piece will be inspected under a loupe by a demanding client.
6. Does it come certified? Yes, every stone ships with a GRA certificate and a matching girdle inscription. See what the certificate means.
Pairing and settings
7. What pairs well with a marquise center? Round or baguette side stones. A marquise flanked by two small rounds is a classic three-stone. We also sell marquise pairs as side stones.
8. How should it be set? V-prongs on both points to prevent chipping. A bezel or halo adds protection. Details are in our setting protection guide.
9. Can it be an everyday ring? Yes, once the tips are protected. Unprotected, the points catch on things.
Pricing and sourcing
10. Why is it priced above a round? Hand-finished tips and higher yield loss make marquise a small premium. The retail price reflects the large face-up look, so margin usually holds.
11. What sizes do you cut? Standard 1ct and 2ct, plus custom. See the 1ct stone. We cut matched pairs on request.
12. What is the MOQ? One stone for samples, so you can check the bow-tie and tips before a bulk run. Our sample process explains how.
For a broader view of all the shapes we offer, start with the complete cut guide.
Sizing marquise for settings
Marquise sizes are quoted in carat and mm. A 1ct marquise is roughly 10x5mm, a 2ct around 12x6.5mm. Because the shape is elongated, the mm length is what matters for the setting, not just carat. Always tell your bench the mm dimensions, not just the weight. We list mm on every product, like the 1ct marquise. For conversion logic, see the mm chart.
Pairing marquise in designs
Marquise works as a center or as flanking sides. As a center, pair it with a slim band. As sides, two marquise flanking a round is timeless. Because marquise is long, it can overwhelm a small setting; match the mounting width to the stone. We cut matched marquise pairs for side-stone work. Browse the range on the marquise page and request custom pairs through custom cut.
Why buy marquise from a factory
The marquise is where factory quality matters most, because the bow-tie and tip finishing vary hugely between suppliers. Buying direct from a cutting factory means you can ask to see face-up photos before shipment and confirm the ratio. Every stone ships GRA-certified, explained in our certificate guide. Start with a sample order, as described in the sample process.
Ordering a marquise that photographs well
If you sell online, ask us for face-up photos of the actual marquise before shipment. We want you to see the light return. A well-cut marquise glows evenly; a shallow one shows a center shadow. This pre-shipment check prevents returns. We include it for wholesale orders. See the shapes on the marquise page and start on custom cut.
Is marquise a good wedding-band partner?
A marquise center usually pairs with a contoured or curved band because of its tapered ends. Discuss the band design with your bench before ordering the center. We can cut to the length your setting needs. For matched side-stone pairs, ask on the custom cut page.
Next steps for a marquise order
If the marquise is the shape you want, start with a sample 1ct. Check the two tips for protection needs, confirm the ratio, then order the bulk. Matched pairs for side stones are cut from the same batch. Every stone ships GRA-certified. Browse the marquise range and begin on custom cut.
What to expect when ordering
The order process is simple: tell us the carat, color, clarity and whether you need a pair. We quote the tier price. You place a sample, inspect the tips and light return, then place the bulk. Every marquise arrives with a GRA certificate and a laser-inscribed girdle matched to the report. We also send face-up photos on request so you can confirm the bow-tie is minimal before shipment. This transparency is standard for us.
Because marquise is a shape where factory quality varies so much, buying direct is especially valuable. A cheaper marquise from an unverified source often shows a dark center. Our QC catches that before packing. Start small, verify, then scale. The sample process and tier pricing guides explain the economics.
Ready to order
If these answers match what you need, the next step is a sample. One marquise on approval lets you check the tips, the ratio and the light return before you commit. Once it passes, the bulk order uses the same standards. Every stone ships GRA-certified and laser-inscribed. Browse the marquise range and start on custom cut.
Your next step
Every question above points to the same simple process: sample first, then bulk. We cut and QC marquise stones in Wuzhou, ship them worldwide, and back each one with a GRA certificate. Whether you need a single statement ring stone or matched side-stone pairs, start with a sample so you can judge the light return yourself. The guides index has more wholesale tips, and the marquise collection shows current stock.